说到脱模我想先和大家介绍下我们的日常生产程序，一般来说我们先将模具里面浇灌上混凝土，然后将防撞墙模具放置在震动平台上，将其中的气泡排出，最后静置数个小时后就可以进行脱模了，今天我教给大家一个小技巧，就是在大家放混凝土之前可以先在模具内侧涂抹上一层费油，这样不仅可以更快更好的脱模还可以对模具起到一定的保护作用。

 

另外我想大家一定还对防撞墙模具的脱模时间有困惑吧，其实脱模的时间和季节温度都是有一定的关系的所以在夏季的时候可能脱模的时间较短而冬季脱模时间就较长。

I think people who have come into contact with the anti-collision wall mold industry must be confused. Why can't the anti-collision wall mold be demoulded and removed cleanly sometimes in our daily production process? Or why do I use the same mold today

 

Is it different from yesterday's demoulding time? Today, let's talk about how to demould the mold quickly in daily production?

 

When it comes to demoulding, I'd like to introduce our daily production procedures. Generally speaking, we first pour concrete into the mold, then place the anti-collision wall mold on the vibration platform, discharge the bubbles, and finally

 

Demoulding can be carried out after standing for several hours. Today I teach you a little skill, that is, before you put concrete, you can apply a layer of oil on the inner side of the mold, which can not only demould faster and better, but also

 

It can protect the mold.

In addition, I think you must be confused about the demoulding time of the anti-collision wall mold. In fact, the demoulding time is related to the seasonal temperature, so the demoulding time may be short in summer and short in winter

It's longer.