The picture presentation of the plastic formwork of the anti-collision wall is based on the development of the plastic mold of the conventional model 80-120cm high concrete anti-collision wall. At present, the application frequency is still lower than that of the steel mold of the anti-collision wall. Of course, the plastic mold is mainly made for the production in some areas with special needs and areas with large changes in the size of the mold, Relatively speaking, the customization cost of plastic molds is much lower than that of steel molds. Both the cost and customization procedure are much simpler, which is why some individual size orders choose plastic molds. A major advantage of plastic molds is that they are easy to carry or transport. The importance of a steel mold is equivalent to more than ten plastic molds, and the transportation weight of plastic molds is relatively light, and the transportation cost will be reduced accordingly. The general process of using the plastic formwork of the anti-collision wall has not changed, but the plastic mold has not been disassembled and assembled, which means that the application time of the plastic mold will be shorter. The plastic formwork of anti-collision wall is also a cast-in-situ application, with a thickness higher than that of other plastic molds, simple shape and convenient use. It often cooperates with steel molds for highway related protection construction. Generally speaking, the construction requirements of the anti-collision wall are relatively high, especially for the hardness and anti-collision performance of the anti-collision wall. Now the anti-collision wall is reinforced by steel bars, so that the wall can withstand the impact of greater force.