The general production of Jianxin mould produces cast-in-situ anti-collision wall mould and bridge guardrail formwork. The production operation of Jianxin mould is described in detail from the aspects of formwork material, place of use and so on. The formwork uses steel plate
The surface of the produced concrete prefabricated parts is smooth, compact and can be used for a long time without frequent replacement. The cast-in-situ anti-collision wall formwork is made of bridge guardrail formwork
Precast concrete parts often appear on many bridges to protect vehicles. When making bridge guardrails with formwork, they will be produced by on-site pouring, which costs a lot of money
The production time is very little, and the construction personnel can complete the production task in a limited time. Cast in situ anti-collision wall formwork bridge guardrail formwork shall be placed in a clean and dry warehouse after using the formwork to avoid formwork
The slab is damaged, which affects the service time of the formwork. The production process of using the formwork to make concrete precast parts has been quite mature, so the formwork is widely used. Cast in situ anti-collision wall mould
After the bridge guardrail formwork is used, the formwork shall be placed in a suitable place to avoid damage to the formwork. The production process of using the formwork to make concrete precast parts has been quite mature, so the formwork
It is widely used. Generally, it can be used for up to one year or even for a long time. Therefore, when the bridge guardrail formwork is used, it needs to operate the formwork according to the specific operation steps.