水泥现浇防撞墙模具

 

防护墙模具在山区沿河高速公路道路中更是发挥着重要的作用、由于山区沿河的高速公路道路危险性更高、在沿河地区设立防护墙为的是让沿河路基通过改变水道的流向、使水道偏离被保护的路基所以防护墙模具在山区及沿河地区应用更为广泛。

 

防撞墙模板采用现场浇筑生产高度80厘米，很少防撞墙预制块通过预制生产出来，所以通过防撞墙的种类决定了其作用。不同型号的水泥防撞墙模板、公路防撞墙模板制作起来也是不同的，防撞护栏钢模板设计制造厂对于该模具水泥防撞墙模板、公路防撞墙模板的种类及作用是根据泽达模具现在正在焊接的防撞墙钢模板来生产的，而防撞墙预制块的生产需要高强度的混凝土才可以，基本上都是使用C30的混凝土进行浇筑生产。

 

 

 

 

There are cement cast-in-situ anti-collision wall molds, expressway anti-collision wall molds, AB anti-collision wall molds and cast-in-situ anti-collision wall molds, all of which are formed by 3mm steel plate sheet metal, with rapid production, no large equipment, small investment and removable molds. The dimensions can be customized according to the drawing requirements. The outer surface is fixed with angle steel, and the joint is formed by buckle and bolt combination. The anti-collision wall molds The steel mould of anti-collision wall is convenient to disassemble, the production process is simple, and the field production is not limited. It is a new type of steel mould for cement prefabricated parts.

 

The protective wall mold plays an important role in the expressway along the river in the mountain area. Because the expressway along the river in the mountain area is more dangerous, the protective wall is set up in the river area to make the subgrade along the river deviate from the protected subgrade by changing the flow direction of the waterway, so the protective wall mold is more widely used in the mountain area and the river area.

 

The anti-collision wall formwork is cast in situ, with a production height of 80cm. Few anti-collision wall precast blocks are produced through prefabrication, so its function is determined by the type of anti-collision wall. Different types of cement anti-collision wall formwork and highway anti-collision wall formwork are also made differently. The types and functions of the cement anti-collision wall formwork and highway anti-collision wall formwork are produced according to the anti-collision wall steel formwork being welded by Zeda mould, and the production of anti-collision wall precast blocks requires high-strength concrete, Basically, C30 concrete is used for pouring production.